Temporary Abutments

The classic provisional abutments for K3Pro® are suitable for cementation – including with temporary cement – particularly for an acrylic (plastic) provisional restoration. They can be individually modified chairside. The gingival height is 1.5 millimeters. An angulated version of up to 15 degrees is also available. There is no conical friction fit to the implant, allowing easier abutment handling and relieving load on the healing implant. The abutment sits on the hex and on the implant shoulder and is secured with the retaining screw. A particular highlight: the impression caps for the closed-tray impression technique of K3Pro® also fit precisely onto the PA abutment, which can therefore also serve as a transfer post (especially useful with strongly divergent implants). An abutment analog, healing cap, and waxing cap are also available. • Abutment for fabricating a provisional restoration • No friction-fit connection to the implant, allowing easier handling of the abutment • Abutment can be individually modified chairside • Precisely fitting impression caps for closed-tray impressions via transfer posts as well as direct abutment impressions • Healing cap and waxing caps are available as a base for the provisional restoration • Overall height (OH) of 1.5 mmExpert tip: Use these abutments to compensate for strongly divergent implants, simplifying their impression-taking.

The classic provisional abutments for K3Pro® are suitable for cementation – including with temporary cement – particularly for an acrylic (plastic) provisional restoration. They can be individually modified chairside. The gingival height is 1.5 millimeters. An angulated version of up to 15 degrees is also available. There is no conical friction fit to the implant, allowing easier abutment handling and relieving load on the healing implant. The abutment sits on the hex and on the implant shoulder and is secured with the retaining screw. A particular highlight: the impression caps for the closed-tray impression technique of K3Pro® also fit precisely onto the PA abutment, which can therefore also serve as a transfer post (especially useful with strongly divergent implants). An abutment analog, healing cap, and waxing cap are also available. • Abutment for fabricating a provisional restoration • No friction-fit connection to the implant, allowing easier handling of the abutment • Abutment can be individually modified chairside • Precisely fitting impression caps for closed-tray impressions via transfer posts as well as direct abutment impressions • Healing cap and waxing caps are available as a base for the provisional restoration • Overall height (OH) of 1.5 mmExpert tip: Use these abutments to compensate for strongly divergent implants, simplifying their impression-taking.

The classic provisional abutments for K3Pro® are suitable for cementation – including with temporary cement – particularly for an acrylic (plastic) provisional restoration. They can be individually modified chairside. The gingival height is 1.5 millimeters. An angulated version of up to 15 degrees is also available. There is no conical friction fit to the implant, allowing easier abutment handling and relieving load on the healing implant. The abutment sits on the hex and on the implant shoulder and is secured with the retaining screw. A particular highlight: the impression caps for the closed-tray impression technique of K3Pro® also fit precisely onto the PA abutment, which can therefore also serve as a transfer post (especially useful with strongly divergent implants). An abutment analog, healing cap, and waxing cap are also available. • Abutment for fabricating a provisional restoration • No friction-fit connection to the implant, allowing easier handling of the abutment • Abutment can be individually modified chairside • Precisely fitting impression caps for closed-tray impressions via transfer posts as well as direct abutment impressions • Healing cap and waxing caps are available as a base for the provisional restoration • Overall height (OH) of 1.5 mmExpert tip: Use these abutments to compensate for strongly divergent implants, simplifying their impression-taking.

The classic provisional abutments for K3Pro® are suitable for cementation – including with temporary cement – particularly for an acrylic (plastic) provisional restoration. They can be individually modified chairside. The gingival height is 1.5 millimeters. An angulated version of up to 15 degrees is also available. There is no conical friction fit to the implant, allowing easier abutment handling and relieving load on the healing implant. The abutment sits on the hex and on the implant shoulder and is secured with the retaining screw. A particular highlight: the impression caps for the closed-tray impression technique of K3Pro® also fit precisely onto the PA abutment, which can therefore also serve as a transfer post (especially useful with strongly divergent implants). An abutment analog, healing cap, and waxing cap are also available. • Abutment for fabricating a provisional restoration • No friction-fit connection to the implant, allowing easier handling of the abutment • Abutment can be individually modified chairside • Precisely fitting impression caps for closed-tray impressions via transfer posts as well as direct abutment impressions • Healing cap and waxing caps are available as a base for the provisional restoration • Overall height (OH) of 1.5 mmExpert tip: Use these abutments to compensate for strongly divergent implants, simplifying their impression-taking.

The classic provisional abutments for K3Pro® are suitable for cementation – including with temporary cement – particularly for an acrylic (plastic) provisional restoration. They can be individually modified chairside. The gingival height is 1.5 millimeters. An angulated version of up to 15 degrees is also available. There is no conical friction fit to the implant, allowing easier abutment handling and relieving load on the healing implant. The abutment sits on the hex and on the implant shoulder and is secured with the retaining screw. A particular highlight: the impression caps for the closed-tray impression technique of K3Pro® also fit precisely onto the PA abutment, which can therefore also serve as a transfer post (especially useful with strongly divergent implants). An abutment analog, healing cap, and waxing cap are also available. • Abutment for fabricating a provisional restoration • No friction-fit connection to the implant, allowing easier handling of the abutment • Abutment can be individually modified chairside • Precisely fitting impression caps for closed-tray impressions via transfer posts as well as direct abutment impressions • Healing cap and waxing caps are available as a base for the provisional restoration • Overall height (OH) of 1.5 mmExpert tip: Use these abutments to compensate for strongly divergent implants, simplifying their impression-taking.

The classic provisional abutments for K3Pro® are suitable for cementation – including with temporary cement – particularly for an acrylic (plastic) provisional restoration. They can be individually modified chairside. The gingival height is 1.5 millimeters. An angulated version of up to 15 degrees is also available. There is no conical friction fit to the implant, allowing easier abutment handling and relieving load on the healing implant. The abutment sits on the hex and on the implant shoulder and is secured with the retaining screw. A particular highlight: the impression caps for the closed-tray impression technique of K3Pro® also fit precisely onto the PA abutment, which can therefore also serve as a transfer post (especially useful with strongly divergent implants). An abutment analog, healing cap, and waxing cap are also available. • Abutment for fabricating a provisional restoration • No friction-fit connection to the implant, allowing easier handling of the abutment • Abutment can be individually modified chairside • Precisely fitting impression caps for closed-tray impressions via transfer posts as well as direct abutment impressions • Healing cap and waxing caps are available as a base for the provisional restoration • Overall height (OH) of 1.5 mmExpert tip: Use these abutments to compensate for strongly divergent implants, simplifying their impression-taking.

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK

NOTE! This item is being replaced by the new TPA.XP abutment line, available at: TPA.XP Abutments The temporary provisional abutments for K3Pro® are specifically designed for polymerizing provisionals directly in the mouth. They can and should be individually shortened. They are available in PEEK and titanium, as well as in two diameters. To protect the healing implant, no conical friction fit to the abutment is created while the provisional is being worn. Additional benefit: this makes the provisional restoration easier to handle. The abutment therefore sits only on the hex and is secured with the retaining screw.• Abutment can and should be individually shortened • Suitable for polymerizing provisionals in the mouth • Diameters available from 3.0–4.5 mm • Abutments available in titanium and PEEK