Cerec compatible Abutments (CS)

The CS Cerec®-compatible abutment is suitable for fabricating an occlusally screw-retained crown or an emergence-profile abutment based on K3Pro® using Dentsply Sirona's special Cerec procedure. For intraoral scan impressions using the Cerec®-compatible Omnicam or Bluecam, scan caps are available either directly on the selected abutment or as separate Cerec®-compatible scan bodies. The abutment's connection features a special notch pre-configured to accept the Cerec blank. Processing instructions are available on request. Two overall heights are available for both platforms. Conical implant-abutment connection.• Base for fabricating an individual zirconia abutment using the CAD/CAM procedure with its own emergence profile • Precisely fitting Cerec®-compatible scan cap for digitizing the abutment (Omni and Bluecam caps available) • For fabricating hybrid abutments & occlusally screw-retained crowns • Anti-rotation protection of the zirconia abutment via a notch on the base abutment • Exclusively available in two indication-specific overall heights • 1.5° cone connection for maximum stability and bacterial tightness

The CS Cerec®-compatible abutment is suitable for fabricating an occlusally screw-retained crown or an emergence-profile abutment based on K3Pro® using Dentsply Sirona's special Cerec procedure. For intraoral scan impressions using the Cerec®-compatible Omnicam or Bluecam, scan caps are available either directly on the selected abutment or as separate Cerec®-compatible scan bodies. The abutment's connection features a special notch pre-configured to accept the Cerec blank. Processing instructions are available on request. Two overall heights are available for both platforms. Conical implant-abutment connection.• Base for fabricating an individual zirconia abutment using the CAD/CAM procedure with its own emergence profile • Precisely fitting Cerec®-compatible scan cap for digitizing the abutment (Omni and Bluecam caps available) • For fabricating hybrid abutments & occlusally screw-retained crowns • Anti-rotation protection of the zirconia abutment via a notch on the base abutment • Exclusively available in two indication-specific overall heights • 1.5° cone connection for maximum stability and bacterial tightness

The CS Cerec®-compatible abutment is suitable for fabricating an occlusally screw-retained crown or an emergence-profile abutment based on K3Pro® using Dentsply Sirona's special Cerec procedure. For intraoral scan impressions using the Cerec®-compatible Omnicam or Bluecam, scan caps are available either directly on the selected abutment or as separate Cerec®-compatible scan bodies. The abutment's connection features a special notch pre-configured to accept the Cerec blank. Processing instructions are available on request. Two overall heights are available for both platforms. Conical implant-abutment connection.• Base for fabricating an individual zirconia abutment using the CAD/CAM procedure with its own emergence profile • Precisely fitting Cerec®-compatible scan cap for digitizing the abutment (Omni and Bluecam caps available) • For fabricating hybrid abutments & occlusally screw-retained crowns • Anti-rotation protection of the zirconia abutment via a notch on the base abutment • Exclusively available in two indication-specific overall heights • 1.5° cone connection for maximum stability and bacterial tightness

The CS Cerec®-compatible abutment is suitable for fabricating an occlusally screw-retained crown or an emergence-profile abutment based on K3Pro® using Dentsply Sirona's special Cerec procedure. For intraoral scan impressions using the Cerec®-compatible Omnicam or Bluecam, scan caps are available either directly on the selected abutment or as separate Cerec®-compatible scan bodies. The abutment's connection features a special notch pre-configured to accept the Cerec blank. Processing instructions are available on request. Two overall heights are available for both platforms. Conical implant-abutment connection.• Base for fabricating an individual zirconia abutment using the CAD/CAM procedure with its own emergence profile • Precisely fitting Cerec®-compatible scan cap for digitizing the abutment (Omni and Bluecam caps available) • For fabricating hybrid abutments & occlusally screw-retained crowns • Anti-rotation protection of the zirconia abutment via a notch on the base abutment • Exclusively available in two indication-specific overall heights • 1.5° cone connection for maximum stability and bacterial tightness

NOTE! Cerec®-compatible abutments with the 4.5 mm connection (L-blocks) will no longer be part of the product portfolio going forward.The CS Cerec®-compatible abutment is suitable for fabricating an occlusally screw-retained crown or an emergence-profile abutment based on K3Pro® using Dentsply Sirona's special Cerec procedure. For intraoral scan impressions using the Cerec®-compatible Omnicam or Bluecam, scan caps are available either directly on the selected abutment or as separate Cerec®-compatible scan bodies. The abutment's connection features a special notch pre-configured to accept the Cerec blank. Processing instructions are available on request. Two overall heights are available for both platforms. Conical implant-abutment connection.• Base for fabricating an individual zirconia abutment using the CAD/CAM procedure with its own emergence profile • Precisely fitting Cerec®-compatible scan cap for digitizing the abutment (Omni and Bluecam caps available) • For fabricating hybrid abutments & occlusally screw-retained crowns • Anti-rotation protection of the zirconia abutment via a notch on the base abutment • Exclusively available in two indication-specific overall heights • 1.5° cone connection for maximum stability and bacterial tightness

NOTE! Cerec®-compatible abutments with the 4.5 mm connection (L-blocks) will no longer be part of the product portfolio going forward.The CS Cerec®-compatible abutment is suitable for fabricating an occlusally screw-retained crown or an emergence-profile abutment based on K3Pro® using Dentsply Sirona's special Cerec procedure. For intraoral scan impressions using the Cerec®-compatible Omnicam or Bluecam, scan caps are available either directly on the selected abutment or as separate Cerec®-compatible scan bodies. The abutment's connection features a special notch pre-configured to accept the Cerec blank. Processing instructions are available on request. Two overall heights are available for both platforms. Conical implant-abutment connection.• Base for fabricating an individual zirconia abutment using the CAD/CAM procedure with its own emergence profile • Precisely fitting Cerec®-compatible scan cap for digitizing the abutment (Omni and Bluecam caps available) • For fabricating hybrid abutments & occlusally screw-retained crowns • Anti-rotation protection of the zirconia abutment via a notch on the base abutment • Exclusively available in two indication-specific overall heights • 1.5° cone connection for maximum stability and bacterial tightness

K3Pro CEREC Scan Post 2 mm Platform (GH 0.5) – Precise Digital ImpressionThe K3Pro CEREC scan post 2 mm platform (GH 0.5) was specifically developed for digital impression-taking with CEREC systems. It serves as a reliable connection between the implant and the scan body, enabling exact capture of the implant position at abutment level.Thanks to the 2 mm platform and the GH 0.5 geometry, the scan post is optimally matched to K3Pro implants. It ensures stable positioning in the mouth and precise transfer of implant data to the digital CAD/CAM system.Made from high-quality, biocompatible materials, the scan post offers maximum stability during the scanning process and ensures exact, reproducible digital modeling. Integration into the CEREC workflow enables efficient planning and fabrication of implant-supported dentures.Product benefits at a glance:Specifically for digital impressions with CEREC systemsPlatform: 2 mm, geometry GH 0.5Exact transfer of the implant position at abutment levelStable positioning during the scanning processHigh-quality, biocompatible materialOptimal integration into the digital workflowSupports precise CAD/CAM fabrication of implant-supported restorationsWith the K3Pro CEREC scan post 2 mm platform (GH 0.5), you secure a reliable basis for precise digital impressions and precisely fitting implant-prosthetic results.

K3Pro CEREC Scan Post 3 mm Platform (GH 0.5) – Precise Digital ImpressionThe K3Pro CEREC scan post 3 mm platform (GH 0.5) was specifically developed for digital impression-taking with CEREC systems. It serves as a reliable connection between the implant and the scan body, enabling exact capture of the implant position at abutment level.Thanks to the 3 mm platform and the GH 0.5 geometry, the scan post is optimally matched to K3Pro implants. It ensures stable positioning in the mouth and precise transfer of implant data to the digital CAD/CAM system.Made from high-quality, biocompatible materials, the scan post offers maximum stability during the scanning process and ensures exact, reproducible digital modeling. Integration into the CEREC workflow enables efficient planning and fabrication of implant-supported dentures.Product benefits at a glance:Specifically for digital impressions with CEREC systemsPlatform: 3 mm, geometry GH 0.5Exact transfer of the implant position at abutment levelStable positioning during the scanning processHigh-quality, biocompatible materialOptimal integration into the digital workflowSupports precise CAD/CAM fabrication of implant-supported restorationsWith the K3Pro CEREC scan post 3 mm platform (GH 0.5), you secure a reliable basis for precise digital impressions and precisely fitting implant-prosthetic results.