RapidFix Abutments (VBA)

Retaining screws for secondary components of the K3Pro VBA RapidFix abutments and MB.XP abutment series. The screws are used to securely fasten the corresponding components to the abutments.Product features:Compatibility: K3Pro VBA RapidFix abutments, MB.XP abutmentsPackage contents: 2 screws

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations

VBA RapidFix® abutments for removable or screw-retained dentures. The RapidFix abutments are the tailor-made solution for nearly all indications involving screw-retained or removable dentures, thanks to an extremely wide range of overall heights and angulations. Suitable for bridges and bars. Optimal for the "Four-on-K3Pro" or "Six-on-K3Pro" approach based on the proven concept by Prof. Maló. Available with or without indexing (please specify when ordering). Occlusal retaining screw for the primary component within the solid secondary component. Prosthetic caps available for bonding, laser welding, PEEK, casting, or burn-out processing, as well as removable versions with a Locator connection allowing angulations of up to 40 degrees. CAD-compatible. Particularly economical thanks to impression-taking at abutment level and the abutment analog. Available for all K3Pro implants with the classic bacteria-tight cone connection. • Abutment for removable or screw-retained dentures, bridges, and bars • For implant-supported screw-retained restorations • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Two-piece abutment with and without indexing • No indexing or anti-rotation feature on the screw-retained platform• Straight abutments are monolithic with an integrated thread and external hex for insertion • Angulated abutments up to 40° with a separate screw and optional indexing • Suitable for analog and CAD workflows (data set integrated into the K3Pro® library) • Abutments cannot be chairside modified • For splinted restorations only, not intended for single-tooth restorations