XP Finder Pro Abutments (DLA)

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue.DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water.Abutments with 18° angulation: These secondary components can correct divergences between implants of up to 65°. With the 18° angulated secondary components, the practitioner is able to cover a broad range of clinical implant situations.• Abutment for removable dentures• Mucosa- and implant-supported restoration• 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae• Abutments available in 0° and 18° to compensate for strong divergences• Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue.DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water.Abutments with 18° angulation: These secondary components can correct divergences between implants of up to 65°. With the 18° angulated secondary components, the practitioner is able to cover a broad range of clinical implant situations.• Abutment for removable dentures• Mucosa- and implant-supported restoration• 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae• Abutments available in 0° and 18° to compensate for strong divergences• Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue.DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water.Abutments with 18° angulation: These secondary components can correct divergences between implants of up to 65°. With the 18° angulated secondary components, the practitioner is able to cover a broad range of clinical implant situations.• Abutment for removable dentures• Mucosa- and implant-supported restoration• 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae• Abutments available in 0° and 18° to compensate for strong divergences• Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue.DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water.Abutments with 18° angulation: These secondary components can correct divergences between implants of up to 65°. With the 18° angulated secondary components, the practitioner is able to cover a broad range of clinical implant situations.• Abutment for removable dentures• Mucosa- and implant-supported restoration• 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae• Abutments available in 0° and 18° to compensate for strong divergences• Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue.DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water.Abutments with 18° angulation: These secondary components can correct divergences between implants of up to 65°. With the 18° angulated secondary components, the practitioner is able to cover a broad range of clinical implant situations.• Abutment for removable dentures• Mucosa- and implant-supported restoration• 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae• Abutments available in 0° and 18° to compensate for strong divergences• Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

The Finder Pro abutments from K3Pro® are the innovative solution for removable implant-supported dentures: Biocompatible PVD hard coating. The coating is an extremely hard zirconium carbonitride (ZrCN) multilayer coating. It offers high abrasion and wear resistance. Zirconia surfaces have half the plaque affinity of titanium, largely preventing inflammatory reactions in the soft tissue. DOCKLOCS® ATTACHMENT SYSTEMS retention inserts made of high-performance polymer. The outstanding properties of the retention inserts are their very high hardness combined with high toughness and dynamic load capacity (cycle count). They also have high resistance to chemicals and lipids (fat) with a low tendency to absorb water. • Abutment for removable dentures • Mucosa- and implant-supported restoration • 1.5° cone connection for a bacteria-tight seal and preservation of bone and papillae • Abutments available in 0° and 18° to compensate for strong divergences • Abutments cannot be chairside modified

Finder Pro Lab Set for Divergence Compensation up to 40°With the Finder Pro Lab Set for divergence compensation up to 40° from Argon Dental, achieve maximum precision and long-lasting patient comfort. This laboratory matrix set, including the retention housing, impresses with high-quality materials and maximum flexibility.Optimized retention housingThe retention housing is equipped with additional horizontal grooves that significantly improve resistance to vertical and horizontal movement. The red anodized surface also provides an attractive appearance, even with thin denture material.High Performance PolymerThe retention inserts are made of robust polyamide, offering both high durability and comfortable fit for patients.Special material properties:High hardness combined with a cushioning effectStrong resistance to chemicals, cleaning, and disinfecting agentsLow water absorption for long-lasting stabilitySuitable for steam sterilization at 134°C